Extinguisher Statutes and Rules (TFM01) Practice Test

These questions are part of the practice quiz. Start practicing

• Which document shows that a fire extinguisher is properly maintained?
• What is the primary focus of fire extinguisher training?
• What is the minimum clearance required around fire extinguishers?
• What information must yellow tags contain according to the statute?
• When must any change of corporate officers be reported to the state fire marshal?
• Is storage of fire extinguishers in a high-humidity area advisable?
• What is the maximum fee for an initial firm registration certificate?
• Which of the following items is included in the service tag information?
• What type of license does not require an applicant to hold an apprentice permit prior to issuance?
• Why should employees be trained on the use of fire extinguishers?
• Which of the following cannot occur in Texas without proper approval?
• What is the legal requirement regarding fire extinguisher placement in commercial buildings?
• Under what condition can portable extinguishers be serviced without a label of approval?
• Which of the following actions can obstruct access to fire extinguishers?
• What should be checked regularly on a fire extinguisher?
• What dimensions must installation labels for fixed extinguisher systems contain?
• What does the acronym PASS stand for in the context of using a fire extinguisher?
• What is required for performing maintenance on DOT specification portable fire extinguishers?
• What is a requirement for the licensee of Type PL- regarding pre-engineered systems?
• What is the primary purpose of fire extinguishers?
• How long is a renewal of a registration certificate or license valid after issuance?
• What must be included in the application for corporations along with the corporate taxpayer identification number?
• How long does the state fire marshal take to send notice of examination results after administering the examination?
• What type of signature is prohibited on installation labels?
• What must be provided along with the required renewal fee for an expired license?
• Who is considered a registered firm?
• Which document is crucial for the registration of Type C certificates?
• What is the requirement for a licensee while engaged in business activities?
• What kind of extinguisher systems does a Type R license specifically address?
• What is the renewal fee for a Fire extinguisher license (Type PL) for two years?
• What must be punched on the service tag as part of the servicing documentation?
• How far must fire extinguishers be placed from a commercial cooking appliance?
• For a fixed ext. system not pre-engineered, which professionals are allowed to service the system?
• What is an important consideration when choosing extinguisher types for an area?
• What is the maximum fee for renewing an apprentice permit?
• Which factor is important in determining the need for a fire extinguisher?
• What is the renewal fee for certificates of registration for a two-year period?
• After changing a permittee's mailing address, what is required?
• What must be present on the installation label for a fixed ext. system?
• What is the purpose of inspection tags on fire extinguishers?
• What is a requirement for hydrostatic testing equipment?
• What must firms or individuals have to engage in fire extinguisher services?
• What is the penalty for late renewal after 90 days but less than 2 years?
• What condition applies when servicing a carbon tetrachloride extinguisher?
• Which type of license is not issued unless there is prior experience with a Type B license?
• What is included in the additional items for internal maintenance of portable extinguishers?
• What must the State Board of Insurance do regarding registered firms or licensees?
• Are fire extinguishers effective on large-scale fires?
• What color code is associated with class A fire extinguishers?
• Red tags must include which of the following information?
• If a Fire extinguisher license (Type PL) has been expired for 91 days to two years, what is the late renewal fee?
• What is the maximum fee for the initial registration certificate to perform hydrostatic testing of fire extinguishers?
• To what regulatory standard does a yellow tag refer?
• If a registration certificate or license has been expired for more than 90 days but less than two years, what is required to renew it?
• What safety feature is required on portable fire extinguishers?
• Which class of fire extinguisher is suitable for fires caused by cooking oils?
• How much is the maximum fee for the initial registration certificate to conduct fire extinguisher testing?
• What is the fee limit for renewing a firm registration certificate annually?
• Which fire extinguisher type is suitable for electrical fires?
• What is the initial test fee if administered by the SFMO?
• What is required on a red tag regarding the licensee?
• What activities require an individual to hold a license related to fire extinguisher systems?
• What happens if a registration certificate or license has been expired for more than two years?
• Where should fire extinguishers be placed for optimal accessibility?
• What is the initial fee for obtaining a branch office certificate of registration?
• What type of training should be included for fire extinguisher use in workplaces?
• Who must hold a license issued by the department before installing fire extinguishers?
• What are the common locations for installing fire extinguishers?
• What is required for a firm to service or install fixed fire extinguisher systems?
• When performing annual maintenance on carbon dioxide extinguishers, which tool is required?
• Who can plan, install, or service a fixed ext. system that is not pre-engineered?
• Is the licensee required to be on-site at all times during the installation of an engineered fire extinguisher system?
• What must the registered firm do if impairments are found?
• How should the written notice for a yellow tag be delivered?
• What classification system is used for fire extinguishers?
• For a Certificate of registration (Type C), what is the renewal fee if expired for less than 91 days?
• What is the primary agent used in Class K extinguishers?
• What is the fee for renewing a Certificate of registration (Type C) after an expiration of 91 days up to two years?
• For which gas is it vital to use a Class B fire extinguisher?
• What does 'Certify' mean in the context of fire extinguisher maintenance?
• What is the maximum annual renewal fee for an employee license?
• What is the main role of a fire extinguisher in a workplace?
• Which type of fire extinguisher is suitable for kitchen fires involving oil?
• What is the maximum renewal fee for a registration certificate to perform hydrostatic testing of fire extinguishers?
• What type of insurance must a firm's policy include for fire extinguisher services?
• What does a yellow tag inform the owner regarding the system?
• What is necessary to ensure fire safety compliance for installed systems?
• What environment is classified as "hazardous" concerning fire extinguishers?
• Which of the following is NOT a required item for applications for Type PL licenses?
• What is the commissioner allowed to set as the maximum fee for a duplicate registration certificate or license?
• What is required if a registration certificate or license is expired for 90 days or less?
• What type of system may be red tagged after January 1, 2008, if not tested according to UL 300?
• What is the importance of using the right type of extinguisher for a specific fire?
• What is the maximum number of days after receiving results that the state fire marshal must notify examinees?
• What is an essential requirement for the information on installation labels for fixed extinguisher systems?
• What is required for employees of a firm that installs or services portable fire extinguishers?
• After the installation of a fixed fire extinguisher system, how should installation certificates be handled?
• What is one reason why it's important to regularly service fire extinguishers?
• Which statement regarding rubber stamps is true?
• How should fire extinguishers be maintained to prevent failure?
• What might happen if a fire extinguisher does not work properly during an emergency?
• What must be included in the fixed temperature-sensing element of a kitchen hood exhaust system when it is replaced?
• What is the main consideration when determining the number of extinguishers needed in an area?
• How much does it cost to renew a Fire extinguisher license (Type A, B, R, and K) for two years?
• What is the renewal fee cap for a branch office registration certificate?
• What is the fee structure for renewing an expired registration certificate or license if it has been expired for 90 days or less?
• What physical condition of a fire extinguisher can render it ineffective?
• What is the late renewal fee for a Certificate of registration (Type C) that is expired 91 days to two years?
• How soon must a NOTICE OF EXPIRATION be relayed to the correct parties?
• What is the definition of grounds for the denial, suspension, or revocation of a registration certificate?
• Who can install or service portable fire extinguishers?
• Which of the following is a common cause for fire extinguisher inaccessibility?
• Should extinguishers be placed indoors or outdoors?
• When should you use a fire blanket instead of a fire extinguisher?
• How many days prior to a total ownership change must a new application be submitted to the state fire marshal?
• What is the initial fee for a Fire extinguisher license (Type PL)?
• What is the total fee incurred if a Fire extinguisher license (Type A, B, R, and K) is renewed after being expired for 1 day to 90 days?
• What is the initial fee for a Fire extinguisher license (Type A, B, R, and K)?
• Applications for Type C certificates must include a copy of which document?
• What is the duration of validity for a renewal of a registration certificate or license issued under this chapter?
• What is the role of a Class C fire extinguisher?
• What is the maximum width for service tags according to regulations?
• Are fire extinguishers required in residential buildings?
• How much can the fee be for making changes to a registration certificate, license, or permit?
• What is necessary for a firm to perform hydrostatic testing?
• Why are inspections important for fire extinguishers in a business setting?
• What must a firm hold to engage in the business of planning or certifying fire extinguisher systems?
• What is the maximum renewal fee for certificates of registration with late fees included?
• An applicant must complete all application requirements within how long of successfully completing any test required for a license?
• What type of system does Type A license NOT apply to?
• What is the significance of the National Fire Protection Association (NFPA) regarding fire extinguishers?
• What documentation is necessary to replace a lost or destroyed license?
• What is the annual renewal fee cap for a branch office registration certificate?
• What color should service tags for fire extinguishers NOT be?
• What happens when there is a change of ownership of a registered firm?
• What does a Type B license pertain to?
• Who must sign all shop drawings according to the regulations?
• What is the main difference between a dry chemical and a wet chemical extinguisher?
• How many times can an applicant schedule each type of test within a twelve-month period?
• What are "recharge" requirements for fire extinguishers after each use?
• What training is recommended for employees regarding fire extinguishers?
• What is the maximum fee for an apprentice permit?
• A copy of the written notice regarding impairments must be submitted to whom?
• What should a yellow tag indicate?
• What is required for a firm to engage in the business of installing or servicing fire extinguishers?
• What can happen if the wrong type of fire extinguisher is used?
• If a Fire extinguisher license (Type A, B, R, and K) has a renewal late fee of $70, what period of expiration does this apply to?
• After using a fire extinguisher, what is the first step that should be taken?
• What is the retest fee if the test is administered by the SFMO?
• What is the fee for a late renewal of a Fire extinguisher license (Type PL) that expired between 1 to 90 days?
• How many days does the state fire marshal have to notify an examinee of their examination results?
• What proof of technical qualifications is required for Type PL licenses?
• Which class of fire involves combustible metals?
• Which fire extinguisher classification is focused on flammable gases?
• A yellow tag may only be removed by which of the following?
• If a Certificate of registration (Type C) is renewed late (1 to 90 days), what is the fee?
• How often should fire extinguishers be inspected?
• What is the maximum fee for an initial branch office registration certificate?
• What tools are essential for internal maintenance of portable extinguishers?
• For which type of licenses is a written statement from the certificate holder required?
• For what purpose is a verification collar ring used?
• What does the term "fire extinguisher rating" indicate?
• Where must an installation label be affixed after a fixed fire extinguisher system has been installed?
• What does Type A license signify?
• What does the term "fire risk assessment" refer to?
• What type of maintenance is required for fire extinguishers annually?
• What is the minimum required insurance coverage for bodily injury and property damage per occurrence?
• Why is it essential to maintain fire extinguishers regularly?
• How much is the late renewal fee for a Fire extinguisher license (Type PL) that has expired between 1 day and 90 days?
• What fee is charged for a change of ownership of a branch office?
• What type of extinguisher is recommended for fires involving metals?
• Where should the identification be affixed on the vehicle for fire service compliance?
• What is the maximum duration after which a registration certificate or license cannot be renewed?
• Which of the following fees applies to a branch office renewal for a two-year period?
• What must be obtained if a license is lost or destroyed?
• What is the fee for obtaining duplicate or revised certificates, licenses, or permits?
• What is the minimum height for service tags as per the requirements?
• What is the late renewal fee for certificates of registration if expired from 1 day to 90 days?
• Which material should never be used to extinguish a Class B fire?
• Which of the following tasks requires a license issued from the State Board of Insurance?
• What is the initial fee for certificates of registration?
• How do you identify if a fire extinguisher has been discharged and needs replacement?
• What is the requirement for notifying examinees about their results related to a testing service?
• What consequence occurs if a firm fails to maintain the required liability insurance?
• What kind of label must be included on a DOT Non Specification cylinder?
• What is the late renewal fee for a Fire extinguisher license (Type A, B, R, and K) if it has expired for 91 days to two years?
• What is one common characteristic of Class B fires?
• What is the consequence of performing work without proper registration, licensing, or permit?
• What is a fire extinguisher cabinet?
• How much can the fee go up to for an initial firm registration?
• What is the late renewal fee for a Fire extinguisher license (Type A, B, R, and K) that is expired 1 day to 90 days?
• What should you do if a fire extinguisher is empty but not yet serviced?
• What action should be taken if a fire extinguisher's pressure gauge shows green?
• A service tag may be removed only by which of the following?
• Who evaluates firms or individuals to issue registration or licensing in fire extinguisher services?
• Why is it important to check the pressure gauge on an extinguisher?
• Can fire extinguishers be refilled by anyone?
• What is the recommended maximum distance for a fire extinguisher in a business setting?
• What must one have when installing or servicing a fixed fire extinguisher system?
• No test is required for a licensee whose license is renewed within what time frame of expiration?
• Which of the following is NOT a type of fire extinguisher?
• For a Type K license, what must an individual have held for at least six months?
• What should be the first action when using a fire extinguisher according to the PASS method?
• What is typically found on a fire extinguisher label?
• When must the owner be notified about red tag implications?
• What happens if an applicant does not complete all application requirements within the specified timeframe?
• What is the maximum time allowed for a registered firm to submit notification of a change in mailing address?
• What type of fire is caused by flammable liquids, like grease or oil?
• Class K fire extinguishers are mainly used in which environment?
• Which type of license is specifically for cooking areas?
• Why is it important to check a fire extinguisher for damage after use?
• What is the aggregate minimum insurance coverage required for all occurrences for each policy year?
• When should a service tag not be attached?
• What does the certification on the service tag indicate?
• What is meant by DOT Specification in relation to fire extinguishers?
• What must be included in the service of portable carbon dioxide extinguishers?
• Which of the following is true about Class A fires?
• What is a critical reason for maintaining fire extinguishers?
• What maintenance is required after a fire extinguisher has been used?
• How much is the initial fee for a Certificate of registration (Type C)?
• For how long can service tags be established before they need to be renewed?
• Where should the service tag be attached after servicing a fire extinguisher?
• Class D extinguishers are specifically designed to combat what type of fire?
• What is the maximum travel distance to a fire extinguisher in commercial settings?
• What does discoloration or degradation of the extinguishing agent indicate?
• What factor is NOT relevant when determining the appropriate extinguisher for a location?
• What is the maximum fee charged by the commissioner for a new registration certificate upon ownership change?
• What is the purpose of a red tag?
• Can you use water on a Class K fire?
• What is required for hydrostatic testing of portable extinguishers?
• What registration is needed for engaging in the business of hydrostatic testing of DOT specification fire extinguisher cylinders?
• What must be done after a change requiring a revised permit?
• What type of extinguisher should be used for fires involving electrical equipment?
• What is the appropriate action to take if a fire extinguisher is past its expiration date?
• Which of the following is NOT applicable to the Fire extinguisher license (Type PL)?
• What is the significance of the date on a fixed temperature-sensing element in a kitchen hood exhaust system?
• What is the minimum height requirement for numbers and letters on a vehicle?
• What must a portable fire extinguisher have to be sold or leased in Texas?
• How often should fire extinguishers be inspected?
• What is the initial fee for a branch office?
• Under what condition should a red tag be placed on equipment?
• What does Class A fire represent?
• What is the total branch office renewal fee for a two-year period?
• What is the renewal fee for a Certificate of registration (Type C) for two years?
• What does DOT Non Specification mean for a fire extinguisher cylinder?
• Which of the following is NOT a requirement for fire extinguisher placement?
• Within how many days must a license holder notify about a change of registered firm address?
• How soon must a registered firm notify the state fire marshal after termination of a licensee's employment?
• What must hydrostatic testing of fire extinguishers comply with?
• What type of fire would an ABC fire extinguisher address?
• Which of the following classes of fire is a Class C extinguisher designed for?
• For what purpose is the Texas ECR registration number used?
• What type of fire does Class B extinguishers combat?
• A person whose license has been expired for how long must pass another test to obtain a new license?
• What must a fixed temp-sensing element of a fusible metal alloy type have when replaced?
• What does Type PL- license signify?
• How long does it take to receive revised certificates from the state fire marshal?
• How often should a professional service check be performed on fire extinguishers?
• What are the consequences of failing to maintain fire extinguishers?
• What is the fee limit for an initial employee license?
• What is required to certify that a fixed ext. system was installed according to specifications?
• What should you do if you find a fire extinguisher that is damaged?
• What should be done if a fire extinguisher appears damaged?
• Which document must contain the signature and license number of the authorized licensee?
• What types of fire extinguishers should be kept in a kitchen?